Javascript required
Skip to content Skip to sidebar Skip to footer

How to Take in a Shirt on the Sides

In today's post: Learn the right way to take in a shirt so you can make a large shirt smaller and still have it look great!

Plaid flannel shirts are back! It feels like high school to me when I see all this plaid in the stores. Of course, not many of us are wearing our flannel with Doc Martens anymore (remember those days?). I've purchased a few comfy plaid flannel shirts, and I have one beef with them: flannel shrinks, so after a few washes the shirt still fits fine in width but ends up just a little too short. My solution? Buy larger men's shirts at the thrift store and take them in for the perfect fit with a little extra length. Today I'll show you how to take in a shirt the right way.It's pretty simple!

How to take in a shirt THE RIGHT WAY! Easy sewing tutorial.

Take a look at the before and after of my flannel shirt. It always seems like I should just be able to wear an oversized shirt and have it look cute – it sure looks cute when girls on TV do it – but no, it doesn't turn out that way. Oversized shirts just make me look, well, oversized. As you can see from the before photo, the arms are too wide, the body of the shirt is too wide, and the sleeves start too far down on my shoulders.

A woman wearing a shirt that has been taken in to fit better

I've seen plenty of tutorials on taking in a shirt that tell you to just sew up the arms and back down the body – but you'll actually get a much better fit (and more mobility in the arms) with the method for taking in a shirt that I'll show you today.

I like my new shirt – it's just long enough to cover my backside when I wear skinny jeans.

A woman modeling a shirt that has been taken in

How to make a shirt smaller

Here's the right way to take in a shirt (or make a shirt smaller):

Shirt that fits laid over the too large shirt

Lay your oversized shirt down on a flat surface, smoothing it out flat. Place a shirt that fits well directly on top of the larger shirt, making sure it is smoothed out completely flat and not bunched up anywhere. Pull the sleeve inside the shirt as shown above so you can see the "scoop" of the armhole.

How to take in a shirt: cutting

Using the shirt that fits as a guide, trim away the sleeves and excess on the sides to make the shirt smaller. BE SURE to add seam allowance – more than I did would probably be good. (For the best fit, you may want to add an extra half inch to the armholes on the back of the shirt only. As you can see, I didn't do that, but it would have been a good idea.)

Excess trimmed from too large shirt

Trim away the excess on the other side as well, making sure they match.

Next you'll want to cut down the sleeves. Lay your guide shirt on the ground, this time smoothing out the sleeve. You'll see that at the armhole seam the sleeve makes an S shape. It's important to smooth and spread that out as much as possible, then use that as a guide for cutting your new sleeves.

Sleeve piece with curve marked

When you cut new sleeves from the oversized shirt, don't cut through the cuffs. Most men's shirts have two buttons on the cuff so even if they are a little large you can just button them a bit tighter and not have to worry about trying to sew them back together. Turn your sleeves inside out and sew them back together along the bottom. Turn the shirt inside out and sew both sides together.

Shirt with sides taken in, and sleeve pieces

How to take in a shirt: sewing

Now all you need to do is set the sleeves back in. Leaving the shirt inside out, turn the sleeves right side out. Place the shirt and one sleeve as you see in the photo below, making sure the buttons on the cuff are down toward the table (if they're up, you need to switch sleeves). Slide the sleeve inside the armhole, as shown in the second photo below.

Shirt piece is inside out, sleeve pieces goes inside it

Match up the raw edges of the sleeve and armhole, easing the material to fit. Pin well, then sew.

Sleeve pinned into the armscye

Repeat with the other sleeve, press your seams, and your new smaller shirt is ready to wear!

Note: if you're looking for info on how to size down apatternvisit this post from Melly Sews, .

A woman wearing a shirt that was too big, then been taken in to fit

Want more sewing tutorials? Check out these posts:

20 free t-shirt patterns

Easy swing dress pattern

Swing tunic sewing pattern for women

How to sew a half circle skirt

20 sewing projects for beginners

Hello there! I'm a busy mom of five who loves to make things. Crafts, recipes, sewing, holiday projects: I've tried them all, and you can too! I love EASY projects anyone can make.

Read more...

Reader Interactions

How to Take in a Shirt on the Sides

Source: https://www.itsalwaysautumn.com/take-size-shirt-right-way.html